2 Knot or 4 Knot Halter
Available in all halter rope colors shown (ask for any custom colors not listed), designed to be attached to a training lead or long line via E-knot tie or snap. Soft and light when no pressure is being applied from the leadrope and sensitizing at the knots according to the amount of pressure coming through the leadrope, this halter encourages response to changes in feel, pressure, and energy.
The 2 knot halter is the more standard option with pressure points on each side of the nose. The 4 knot halter has 2 extra knots across the top of the nose for horses who lean into pressure by turning and pulling their head to the side, discouraging the "turn and pull" action.
PRODUCT INFO
Custom sized for your horse based on breed and specifics of head size.
Made exclusively of double braid polyester marine line (nylon may be available upon request in some instances).
Each halter will be tied specifically for a certain horse or breed of horse. When you get your halter, try it on your horse's head. Be aware that the knots will set within a couple of uses and the halter fit will increase in size by an inch or so between major junctures. If there are corrections that need to be made to the fit, take photos of the needed changes and remove the halter immediately so that we can adjust the halter or talk you through how to do so. Once the knots set, THE FIT CANNOT BE CHANGED.
To lightly clean, simply wipe with a damp cloth. If severely soiled, wash on delicate cycle inside a garment bag or zipped pillowcase on COLD with MINIMAL fabric softener. Hang to dry. CAUTION: too much fabric softener can cause knots to untie. Do not wash under any circumstances until knots are fully set.
It is fine for your halter to get wet, dirty, etc. However, DO NOT allow your horse to chew your halter-- this will cause the rope to herniate (the inner core will come out through the outer sleeve). Also be advised that, while this rope has a breaking strength of 2900 lbs, it will not stand up to your dog's attempt to make it a chew toy ;-)
The crownpiece of the halter is spliced and burned on the end to join the pieces. However, this juncture can fail if it has unintended or excessive pressure placed on it repeatedly-- the halter is not intended to be pulled or hung by the juncture. The juncture is only intended to keep the crown piece lines joined as a unit for ease of tying.
Further, be advised that this rope has a breaking strength of 2900 lbs and WILL NOT break if your horse pulls back when tied, falls in the trailer, or anything else of the sort.
We are not responsible for anything that goes sideways while you are using one of these halters ;-)
SHIPPING INFO
When shipping is preferred, it will be at buyer's expense plus $2 for Priority USPS shipping in the smallest box available. Scheduled pickup at the farm or at a mutually convenient meeting place is always free.